OneSource Professional Training Solutions, Inc. presents
 

CIERS1 - CCIE 360 R&S Prep Boot Camp 1 On-Site Training

CIERS1 - CCIE 360 R&S Prep Boot Camp 1

Course Description/Agenda

This intensive Boot Camp-style course is designed to help CCIE Routing & Switching candidates determine exactly where they are in their process of preparing for the CCIE R&S v4.0 practical exam and to fill technology gaps through lecture and labs.

The class is approximately 60% lecture and 40% hands-on labs, with extended hours of up to 13 hours per day. Upon completion of the technology lecture that includes best practices for applying and troubleshooting the technology, you will complete labs based on that technology. At the end of the class, you will perform two graded CCIE-level practice labs: a troubleshooting lab and a configuration lab.

Additionally, you will learn how to develop study plans and how to develop and use checklists and decision diagrams to formulate the mindset needed to pass the CCIE lab. With this information stored in your online portal, you can review the material covered in the CIERS1 class as frequently as you wish.

Note: To participate in this course and access your Cisco 360 portal and remote labs, it is highly recommended that you bring the laptop associated with your Cisco 360 Learning Program for CCIE account.

What You'll Learn

• Configuration and Troubleshooting of:
  • Frame Relay
  • Catalyst 3550 and 3560 Switches
  • Open Shortest Path First (OSPF)
  • Enhanced Interior Gateway Routing Protocol (EIGRP)
  • Routing Information Protocol (RIP) v2
• IGP Route Redistribution
• Controlling IGP Updates with Route Maps and Distribute Lists
• BGP-4 Neighbor Relationships (including Route Reflectors and Confederations)
• Filtering BGP Updates using Prefix Lists, AS Path Access Lists, Communities, and Route Maps
• Border Gateway Protocol (BGP) Attribute Manipulation
• IPv6 Interior Routing Protocols
• Multiprotocol Label Switching and Layer 3 VPN
• Advanced Catalyst 3550 Layer 2 and Layer 3 Topics
• WAN QOS (Frame Relay, PPP)
• LAN QOS
• Advanced IP Access Lists
• IP Multicast Routing using PIM Sparse and Dense Modes
• Address Administration, including Network Address Translation (NAT), Dynamic Host Configuration Protocol (DHCP), Hot Standby Router Protocol (HSRP), etc.

Who Should Attend

Candidates for the CCIE Routing & Switching practical exam who are three to six months out from the date.

Course Prerequisites

• CCIE candidates are expected to have an in-depth understanding of the topics in the exam blueprints and are strongly encouraged to have three to five years of job experience before attempting certification
• CCNP or equivalent job experience
• Passing score on CCIE R&S written exam #350-001

Course Outline

Monday

• Introduction
• Lab Strategies
• 7-Hour Core Assessed Lab (CIERSASSESS-1)
  • Frame Relay and Serial Communications
  • Catalyst Switch Configuration
  • IPv4 OSPF
  • IPv4 EIGRP
  • IPv4 RIP
  • Redistribution
  • BGP

Tuesday

• Frame-Relay
• Catalyst Configuration
• VTP Configuration
• EtherChannel
• OSPF Authentication
• Redistribution
• BGP

Wednesday

• Advanced BGP Concepts
• MPLS and Layer 3 VPN
• IP Multicasting
  • DENSE Mode
  • SPARSE Mode
  • Attaining Universal Multicast Connectivity
  • IANA Reserved Multicast Addresses

Thursday

• Catalyst QoS
  • Policing and Marking
• Quality of Service
  • Deploying Quality of Service on a Cisco Network
  • QoS Simulation
• IPv6
• 3-Hour Assessed Troubleshooting Lab (Part 1 - CIERSASSESSU-2)
  • 11 Incidents (Trouble Tickets)

Friday

• 6-Hour Configuration Assessed Lab (Part 2 - CIERSASSESS-2)
  • Frame Relay and Serial Communications
  • Cisco Catalyst Switch Configuration
  • IPv4 OSPF
  • IPv4 EIGRP
  • IPv4 RIP
  • BGP
  • IPv6 Routing
  • Security
  • QoS
  • DHCP
  • Address Administration
  • Gateway Redundancy
  • Multicast
  • MPLS

Labs

Lab 1: CIERSASSESS-1 (CIERS1-CA-LAB01) (6-hour assessed lab)

Lab 2: BGP (intermediate to advanced topics)

Lab 3: MPLS

Lab 4: IP Multicast: Dense Mode

Lab 5: IP Multicast: Sparse Mode

Lab 6: QoS (includes MQC on routers and switches and Catalyst QoS)

Lab 7: CIERSASSESSU-2 (CIERS1-TU-LAB02) (3.5-hour assessed troubleshooting lab)

Lab 8: CIERSASSESS-2 (CIERS1-CA-LAB02) (6-hour assessed lab)

More Seminar Information

OneSource Professional Training Solutions, Inc. Delivery Method  On-Site Training Also Available As  Seminar