|
OneSource Professional Training Solutions, Inc.
presents
CVOICE - Implementing Cisco Unified Communications Voice over IP and QoS v8.0 On-Site Training
CVOICE - Implementing Cisco Unified Communications Voice over IP and QoS v8.0
Course Description/Agenda
In this course, you'll gain an understanding of converged voice and data
networks and the challenges faced by various network technologies. Addressing
design, planning, and deployment practices, you will gain comprehensive hands-on
experience configuring and deploying VoIP networks.
In addition to the knowledge and skills required to integrate gateways into an
enterprise VoIP network, you'll learn how to build and test a sophisticated IP
telephony network that you can use as a template for a real deployment.
The course includes a comprehensive full day on Quality of Service (QoS), in
which you'll learn to configure QoS to support real-time traffic.
We've extended the hours of this course-to 8:30am - 6:00pm each day-to give you the most complete training experience possible and to ensure you have time to absorb and fully grasp the in-depth content that will be covered. What You'll Learn
- VoIP, components of a VoIP network, VoIP protocols, special requirements for
VoIP calls, and Codecs
- Configure gateway interconnections to support VoIP and PSTN calls
- Basic signaling protocols used on voice gateways
- Configure a gateway to support calls using different call control and
signaling protocols
- Define a dial plan, describing the purpose of each dial plan component, and
implement a dial plan on a voice gateway
- Implement a Cisco Unified Border Element (CUBE) gateway to connect to an
Internet Telephony Service Provider
- Exclusive - Investigate the use of various traditional telephony connections,
such as FXS, FXO, E&M, T1 (CAS and PRI), and E1 (CAS and PRI)
- Configure and troubleshoot Cisco's new ISR routers (2811s) and explore their
DSP configuration (PVDM2-32 cards)
- Configure H.323 gateways and gatekeepers and review their functions and
operation
- Configure Session Initiation Protocol (SIP) and Media Gateway Control Protocol
(MGCP)
- Experience G.711, G.723, and G.729 voice coding schemes
- Configure Call Admission Control three different ways
- Configure proper Caller ID
- Experience real-world connections to PBXs, Key Telephone Systems, and the PSTN
- Configure your router/gateway equipment to connect to our public dial plan
network using different call control protocols and procedures
Who Should Attend
- Students completing the CCNP Voice certification track
- Network engineers, architects, and support staff who:
- Maintain and configure voice and data network devices
- Are considering various methodologies to implement VoIP
- Require a fundamental understanding of the issues and solutions related to
implementation
- Require a fundamental understanding of packet telephony technologies that are
common for both enterprise and service provider applications
Course Prerequisites
- Working knowledge of networking fundamentals, including LANs, WANs, and IP
switching and routing
- Interconnecting Cisco Network Devices 2 (ICND2) or equivalent internetworking
skills and knowledge
- Ability to configure and operate Cisco routers and switches and to enable VLANs and DHCP
- Knowledge of traditional PSTN operations and technologies
Course Outline
1. Introduction to Voice Gateways
- Cisco UC Networks and the Role of Gateways
- Gateway Call Routing and Call Legs
- DSP Functionality, Codecs, and Codec Complexity
- Gateway Voice Ports Configuration
2. VoIP Call Legs
- VoIP Call Leg Characteristics
- VoIP Media Transmission
- H.323 Signaling Protocol
- SIP Signaling Protocol
- MGCP Signaling Protocol
- Requirements for VoIP Call Legs
- VoIP Call Legs Configuration
3. Communications Manager Express Endpoints Implementation
- Endpoint Requirements
- Endpoint Configuration
4. Dial Plan Implementation
- Call Routing and Dial Plans
- Digit Manipulation
- Path Selection Configuration
- Calling Privileges Configuration
5. Gatekeeper and CUBE Implementation
- Fundamentals of Gatekeepers
- Cisco Unified Border Element
6. QoS
- QoS Mechanisms and Models
- Classification, Marking, and Link Efficiency Mechanisms
- Managing Congestion and Rate Limiting
- Cisco AutoQoS
Labs Lab 1: Topology and Deployment
Lab 2: Exclusive - Lab Familiarity
Lab 3: Exclusive - VLAN, DHCP, and NTP Configuration
Lab 4: Enhanced - Voice Port Configuration
Lab 5: Enhanced - Communications Manager Express Configuration
Lab 6: Enhanced - Dial Plan Lab 1: VoIP Dial Peers
Lab 7: Enhanced - Dial Plan Lab 2: PSTN Dial Peers
Lab 8: Exclusive - Configuring H.323 Gateways and Codec Parameters
Lab 9: Exclusive - SIP Gateways
Lab 10: Exclusive - Configuring SCCP and SIP Endpoints
Lab 11: Dial Plan Lab 3: Digit Manipulation
Lab 12: Dial Plan Lab 4: Configuring Path Selection
Lab 13: Calling Privileges and Classes of Restriction
Lab 14: Call Coverage
Lab 15: Configuring Gatekeepers
Lab 16: Exclusive - Call Admission Control
Lab 17: Configuring Cisco Unified Border Element
Lab 18: Configuring AutoQoS
Lab 19: Exclusive - SIP Trunking
|
Add to favorites
Email this page
|
On-Site Training
Seminar
