ONS-TDM-SONET - Optical Network Systems Time Division Multiplexing SONET v9.2 - Optical On-Site Training
ONS-TDM-SONET - Optical Network Systems Time Division Multiplexing SONET v9.2 - Optical Course Description/AgendaIn this lab-intensive course, you will get an introduction to the Cisco Optical Network System (ONS) Time Division Multiplexing (TDM) family of transport products, including hands-on work with an ONS 15454, ONS 15600, ONS 15310-MA, and ONS-15310-CL. The ONS 15454, ONS 15310-MA, and ONS 15310-CL are SONET transport system components that can be mixed and matched to create high-speed optical transport networks. You will learn about the SONET optical hierarchy OC-3 (155 Mbps) OC-12 (644 Mbps) OC-48 (2.5 Gbps) and OC-192 (10 Gbps). You will learn how DS-1 (1.5 Mbps) and DS-3 (45 Mbps) electrical signals are carried in the SONET optical links, and you'll learn to configure and build circuits through the ADM10G card, a TDM card in the ONS 15454 DWDM system. In the course, you will cover electrical, Ethernet, and optical protection options, linear and ring topologies, circuit building, and troubleshooting, including investigating Ethernet circuits at Layer 1 and Layer 2 using the CE and ML cards. Each student team will work with an ONS 15454, ONS 15310-MA, and ONS-15310-CL. What You'll Learn
Who Should Attend
Course Prerequisites Knowledge of DS1, DS3, and SONET is very useful Course Outline
Labs Lab 1: Cisco Transport Controller Setup and Login Lab 2: Configure SONET Timing Lab 3: Set Up Protection Groups Lab 4: Provision and Test a Point-to-Point Network Lab 5: Create Manually Routed DS3 Circuits Lab 6: Create a Path-Protected Ring Lab 7: Create VT1.5 Tunnels and DS-1 Circuits Lab 8: Create a Two-Fiber Line Protected Ring Lab 9: Create a Path-Protected Mesh Network Lab 10: Create and Test Ethernet Circuits Lab 11: Create ML1 Card Rapid Protection Data Ring Lab 12: Install Ethernet Aggregation Using CE Cards and ML-MR-10 Lab 13: Create 802.17 RPR Using ML-MR-10 Lab 14: Bridge-and-Roll Circuits Lab 15: Set Up SONET Links to ADM-10G with Protection Lab 16 Configure Circuits in ADM-10G Subnetwork Lab 17: Delete Line-Switched Node Lab 18: Add Line-Switched Node Lab 19: Troubleshooting
|
Add to favorites Email this page
|