2014 National Electrical Code® with NFPA 70E Awareness and Grounding and Bonding Seminar

Presented by National Technology Transfer, Inc.

National Technology Transfer Industrial Training

Bring this seminar on-site to your facility for groups of 10 or more.

This is an exciting code cycle as the code is being upgraded as much as it is being updated.

Course Description

5 day Lecture

4.0 Continuing Education Credits

The following subcomponents are available: 2014 National Electrical Code®

This is an exciting code cycle as the code is being upgraded as much as it is being updated. This cycle you'll find a new system-oriented philosophy that will impact employer system usage and cost in a whole new way

The National Electrical Code® is used by all states for industry-wide electrical standards. Ensure your organization is in compliance now so you can avoid reworking your electrical systems. This course benefits individuals who are either at an introductory level or who are experienced in working with electrical systems. By the conclusion of the course, both levels will significantly increase their knowledge, skill level and confidence. The full five-day combination course will also address how to remain safe when working on or around electrical systems. Additionally, you will learn how to maintain electrical systems with the correct grounding and bonding techniques.

If you?re looking for a shorter review of NEC®, you might be interested in the 3-day lecture witch covers the fundamentals: 2014 National Electrical Code®.

Note: 2011 National Electrical Code® is still available for areas that have not yet adopted the 2014 code cycle.

NFPA 70E Electrical Safety Awareness

Hazards of electricity (shock, arc, blast)
Approach boundaries (shock and flash)
Qualified vs. Unqualified vs. Licensed
Review of safe related work practices (including test meters, over current protection)
Risk categories using the tables in the NFPA 70E
PPE with Arc Flash Protection (ATPV or flame retardant)

2014 NEC®

Branch circuits and feeders
Various calculations
Services
Conductors and over current protection
Wiring methods
Review of raceway and boxes
Wiring materials: switches, switchboards and panel boards
Motors, generators, A/C and refrigeration, plus fire pumps
Transformers
Special locations
Understanding the rules for over current protection
Industrial control panels (Article 409)
Arc flash labeling (Article 110)
Motor disconnect location rules (Article 430)
NEC^® 2014 Code Changes

Grounding and Bonding

Grounding and bonding fundamentals
Grounding: electrical systems, electrode conductor, electrodes and an electrode system
Grounding and bonding for over 600-volt systems
Service equipment and main bonding jumpers
Bonding enclosures and equipment
Equipment grounding conductors
Enclosure and equipment grounding
Ground-fault circuit-interrupter protection
Calculate a grounded conductor size
Sizing an equipment grounding conductor
Calculation to increase the size of an EGC

More Seminar Information

National Technology Transfer, Inc.
Summary	This is an exciting code cycle as the code is being upgraded as much as it is being updated.
Delivery Method	Seminar
Also Available As	On-Site Training
Who Should Attend	If you work with electrical systems and equipment, you need to understand the intricacies of the NEC